Rectangular inductive sensors for easy mounting.
 
 

 
 Sensors for use in conveying.
  • Corner LEDs clearly visible in any mounted position.
  • Very long sensing ranges up to 40 mm.
  • Integrated clamp.
  • Freely selectable sensing face with 5 positions.
  • Versions in 3-wire and 4-wire technology.

Applications
The new inductive rectangular type IMC (40 x 40 mm) is specially suited for use in conveying. Now, there are also electromagnetic field immune and Teflon-coated units for welding applications.

Versions
The various versions of the IMC design are available in 3-wire or 4-wire technology, with correction factor 1 or specially for welding areas.

Installation
By loosening the adjusting screw, the sensing face can be rotated to 5 different positions and thus be optimally adapted to your applications. The two clearly visible corner LEDs allow the switching status and operating status to be seen even under adverse installation conditions.

IM5115 – Inductive sensor, 40 x 40 mm rectangular, sensing range 20 mm flush mountableIM5116 – Inductive sensor, 40 x 40 mm rectangular, sensing range 35 mm non flush mountableIM5117 – Inductive sensor, 40 x 40 mm rectangular, sensing range 40 mm non flush mountable

IM5119 – Inductive sensor, 40 x 40 mm rectangular, sensing range 20 mm flush mountable, K=1, electromagnetic field immune, 3-wireIM5120 – Inductive sensor, 40 x 40 mm rectangular, sensing range 35 mm non flush mountable, K=1, electromagnetic field immune, 3-wire

IM5124 – Inductive sensor, 40 x 40 mm rectangular, sensing range 20 mm flush mountable, K=1, electromagnetic field immune, 4-wire, PTFE-coated housingIM5125 – Inductive sensor, 40 x 40 mm rectangular, sensing range 35 mm non flush mountable, K=1, electromagnetic field immune, 4-wire, PTFE-coated housingIM5126 – Inductive sensor, 40 x 40 mm rectangular, sensing range 40 mm non flush mountable, K=1, electromagnetic field immune, 4-wire, PTFE-coated housingIM5132 – Inductive sensor, 40 x 40 mm rectangular, sensing range 20 mm flush mountable, K=1, electromagnetic field immune, 4-wireIM5133 – Inductive sensor, 40 x 40 mm rectangular, sensing range 35 mm non flush mountable, K=1, electromagnetic field immune, 4-wireIM5135 – Inductive sensor, 40 x 40 mm rectangular, sensing range 40 mm non flush mountable, K=1, electromagnetic field immune, 4-wire

Further information: Bulletin (PDF-file 295 kB).