Pozíció-érzékelés és tárgyfelismrés
ecolink M12 - the safe connection even in difficult applications. ecolink M12, the safe connection even in ATEX applications. MAXIpower in miniFormat. Now also with laser class 1. New photoelectric design OG-Cube in metal housing with M18 thread. Automation package for rising stem valves. Cylinder sensors for short-stroke cylinders. Full metal inductive sensors: simply unbeatable! M18 laser sensors for highest precision in laer class 1. O5 contrast sensor - for a splash of colour! Open the floodgates! The new OG wetline. Precise C-slot cylinder sensors. Precise type O5 laser sensor with laser class 1. The height of level detection. Fail-safe inductive sensors directly detect metal. M12 ecolink – for applications in particularly harsh environments. Backlights for contour and orientation verification. Kapacitív érzékelők, amelyek mindenen átlátnak. PMD technology now also with laser protection class 1 Full metal housing inductive sensors for heavy duty. Full metal inductive sensors for the food industry. Hengerszenzorok rövidlöketű hengerekhez. OG family on the leash. Compact distance sensor with 75 m range Miniature sensors with MAX power. Az ifm Opto család bővül: O4 efector dualis Vision szenzor Capacitive sensors ready for use simply by pressing a pushbutton. ecolink M12 Analóg szenzorok lineáris kimeneti jellel constant correction factor 1 Allround-fénysorompó csomagoló-és efector PMD Egyszerűen fentről a szerelendő Non-contact fail-safe inductiv Archive
Folyadékérzékelők és diagnosztikai rendszerek Ipari kommunikáció AS-interfész Vezérlőrendszerek Azonosító rendszerek
 
Backlights for contour and orientation verification.
 
 

 
 High light intensity, low profile
  • Ultra-flat design, as cable or connection version (pigtail).
  • Permanent light or pulse operation.
  • Additional operating mode for 4 times more light.
  • Three illuminated field sizes.
  • Infrared or red light.


Ultra-flat design
The new generation of ifm‘s backlights can be screwed onto a wall or fixture requiring only little space due to the extremely flat design of only 9.2 mm.

Various operating modes
The backlights allow operation with two different light intensities due to the microprocessor technology:
In the “normal” mode the element can work in the permanent or pulsed mode, in the “high” mode pulse operation with 4 times more light is possible. The exposure time is thus reduced by 75 to 80 %, which is an advantage especially for fast processes.

Numerous variants
The backlights generate a homogeneous light field with visible red or invisible infrared light. They can be obtained in three different sizes.

Applications
Contour and orientation verification

O2D900 - Transmitter red light 660 nm · active illuminated area 25 x 25 mm · 2 m cable
O2D902 - Transmitter red light 660 nm · active illuminated area 50 x 50 mm · 2 m cable
O2D904 - Transmitter red light 660 nm · active illuminated area 100 x 100 mm · 2 m cable
O2D910 - Transmitter red light 660 nm · active illuminated area 25 x 25 mm · 0.15 m Pigtail
O2D911 - Transmitter red light 660 nm · active illuminated area 50 x 50 mm · 0.15 m Pigtail
O2D912 - Transmitter red light 660 nm · active illuminated area 100 x 100 mm · 0.15 m Pigtail

O2D901 - Transmitter infrared 880 nm · active illuminated area 25 x 25 mm · 2 m cable
O2D903 - Transmitter infrared 880 nm · active illuminated area 50 x 50 mm · 2 m cable
O2D905 - Transmitter infrared 880 nm · active illuminated area 100 x 100 mm · 2 m cable
O2D906 - Transmitter infrared 880 nm · active illuminated area 25 x 25 mm · 0.15 m Pigtail
O2D907 - Transmitter infrared 880 nm · active illuminated area 50 x 50 mm · 0.15 m Pigtail
O2D908 - Transmitter infrared 880 nm · active illuminated area 100 x 100 mm · 0.15 m Pigtail


Further information: Bulletin (PDF-file 286 kB).