| |
| |
|
|
|
|
|
Magnetic-inductive inline flow sensor. |
|
| |
|
 |
|
| |
|
|
|
With flow rate, totalising and temperature indication.
- High accuracy, repeatability and measurement dynamics.
- Suitable for conductive media from 20μS, flow rate up to 25 l/min.
- Binary, analogue and pulse outputs for signal processing.
- R 1/2 and R 3/4 process connection via adapter.
- 4-digit alphanumeric LED display for representation of the units.
Measurement technique
The flow sensor is based on Faraday’s principle of induction. The conductive medium flowing through a pipe in a magnetic field generates a voltage which is proportional to the flow velocity or flow rate.
Device function
This voltage is detected via electrodes and converted in the evaluation electronics. Analogue, binary and pulse outputs offer various possibilities to process the measured data. Due to the flexible programming by means of pushbuttons the flow sensor can be adapted to different conditions. The sensor is mounted via an adapter. A high protection rating and a robust housing distinguish the sensor in the field.
M12 connector, sold-plated contacts · Electrical design DC PNP/NPN
SM6000 – Magnetic-inductive flow sensor, measuring range flow 0...25 l/min, pulse value 0.05 l...30000 m³
M12 connector, sold-plated contacts · Electrical design DC
SM6050 – Magnetic-inductive flow sensor, measuring range flow 0...25 l/min
Further information: Bulletin (PDF file 310kB).
|
|
|
|
