
|  |
| |
|
|
|
|
|
Inductive proximity switches with a constant correction factor 1. |
|
| |
|
 |
|
| |
|

|
|
K1 sensors resistant to oils and coolants.- IP 67 / IP 68 as well as resistant to oils and coolants.
- Constant sensing range on all metals with correction factor 1.
- All types: M12, M18 and M30 with extra high switching frequency up to 2 kHz.
- Permanently legible laser type label.
- Increased sensing range for non-flush units.
Absolutely ingress-resistant Long life is achieved due to a special design and additional seals, as well as the use of a special plastic that is resistant to oil, coolants and lubricants. Correction factor 1 The new “K = 1” sensors have the same sensing range on all metals, i.e. the correction factor is constantly 1.
Sensing range The increased sensing range is ensured across the whole temperature range, giving better protection against failure due to mechanical damage. M12 connector · 3 wire DC PNP
IFC245 - M12 / b, Sensing range 3 mm, IP 67 / IP 68, Operating temperature -25...70°C
IFC246 -M12 / nb, Sensing range 8 mm, IP 67 / IP 68, Operating temperature -25...70°C
IGC232 - M18 / b, Sensing range 5 mm, IP 67 / IP 68, Operating temperature -25...70°C
IGC233 - M18 / nb, Sensing range 12 mm, IP 67 / IP 68, Operating temperature -25...70°C
IIC218 - M30 / b, Sensing range 10 mm, IP 67 / IP 68, Operating temperature -25...70°C
IIC219 - M30 / nb, Sensing range 22 mm, IP 67 / IP 68, Operating temperature -25...70°C
|
|
|
|