Capacitive sensors ready for use simply by pressing a pushbutton.
 
 

 
 The sensor is parameterised and ready for use simply by pressing a pushbutton.
  • Normally open / normally closed can be set by pressing a pushbutton.
  • Automatic detection of PNP or NPN output loads.
  • Easy setting of the switch point using pushbuttons.
  • Clearly visible indication of the switching status by 4-port LED.
  • Robust stainless steel housing for a higher tightening torque.

 Virtual product presentation (flash animation)
 File with integrated flash player – EXE file 3086 Kbytes


Flashanimation KI5083


Application
Capacitive sensors detect metallic and non-metallic materials in different applications.

Set-up
The output function normally open or normally closed as well as the switch point are set via the two pushbuttons. The switch point is set by briefly pressing a pushbutton. An electronic lock can be activated to safeguard settings.
The automatic detection of a PNP or NPN load, the variable setting of the switching function and the quick connection via connector facilitate the set-up and reduce the number of different versions.

KI5084 – Type M30, flush mountable, M12 connector, setting range 2...12 mm, PNP / NPN
KI5085 – Type M30, flush mountable, M12 connector, setting range 2...12 mm, PNP
KI5086 – Type M30, non-flush mountable, M12 connector, setting range 3...26 mm, PNP / NPN
KI5087 – Type M30, non-flush mountable, M12 connector, setting range 3...26 mm, PNP

Further information: Bulletin (PDF-File 237kB).