Controller E with plc and Ethernet programming interface.


	Controller E with plc and Ethernet programming interface.



			Stand-alone plc with CAA interface. Networkable via Ethernet 10/100 Mbaud. Data exchange via global variables. CoDeSys programmable plc to IEC 61131-3. Programming, set-up and diagnosis via the Ethernet network. Modbus / TCP Server. In the world of automation, controller E is the family name for AS-i masters with powerful integrated plcs. As an additional interface, the unit described here features an Ethernet interface with the CoDeSys Automation Alliance protocol. This allows programming of all connected controller E units via a TCP / IP connection from any location. The units can exchange data without a higher-level master. CoDeSys programming and visualisation tool Using this software, all controller E units from ifm can be programmed in languages to IEC 61131-3. The centralised configuration of the AS-i lines of all connected controller E units is another highlight of these new devices. AC1353 - controller E (ETN-CAA) with one AS-i master AC1354 - controller E (ETN-CAA) with two AS-i masters E70320 - Programming cable RS-232 C AC1307 - Programming software IEC IEC61131 German AC0327 - Programming software IEC IEC61131 English