| |
| |
|
|
|
|
|
Netvoedingen die u zich kunt veroorloven |
|
| |
|
 |
|
| |
|
|
|
Features
All power supplies meet the highest requirement specified in the EMC standards. Thus they are suitable for use in industrial and domestic areas. An extensive approval package covers EN 60950, UL 1950, UL 508, CUL/CSA-C22.2 and the CE-certification including the low voltage directive. The wide-range inputs of 90...260 V AC for one-phase and 340...576 for three-phase power supplies permit use worldwide.
Output response
For almost all power supplies the output voltage can be set between 24 and 28 V with a potentiometer on the front panel. All units are:
short-circuit protected
overload protected
no-load protected
The regulation precision is better than ±2%.
The output noise suppression complies with EN 50081-1
Switched-mode power supplies 1-phase
 DN1020 - 115/230 V AC, 24...28 V DC / 1,3 A
DN1021 - 115/230 V AC, 24...28 V DC / 2,1 A
DN2010 - 115/230 V AC, 24 V DC / 1 A
DN2011 - 115/230 V AC, 24 V DC / 2,5 A
DN2012 - 115/230 V AC, 24...28 V DC / 5 A
DN2013 - 115/230 V AC, 24...28 V DC / 10 A
DN2014 - 230 V AC, 24...28 V DC / 20 A
DN2114 - 115/230 V AC, 24...28 V DC / 20 A
DN2021 - 115/230 V AC, 12 V DC / 3 A
DN2112 - 115/230 V AC, 24 V DC / class 2, 4A
Switched-mode power supplies 3-phase
DN2032 - 400...500 V AC, 24...28 V DC / 5 A
DN2033 - 400...500 V AC, 24...28 V DC / 10 A
DN2034 - 400 V AC, 24...28 V DC / 20 A
DN2134 - 400...500 V AC, 24...28 V DC / 20 A
DN2036 - 400...500 V AC, 24...28 V DC / 30 A
DN2035 - 400...500 V AC, 24...28 V DC / 40 A
Switched-mode power supplies with output voltage according to AS-i
AC1216 - 115/230 V AC, AS-i / 2,8 A
AC1218 - 115/230 V AC, AS-i / 8,0 A
AC1223 - 400...500 V AC, AS-i / 8 A
|
|
|
|
