| |
| |
|
|
|
|
|
ClassicLine: AS-i analogue module with quick mounting technology. |
|
| |
|
 |
|
| |
|
|
|
Simple mounting and high protection rating.
- 2-channel analogue input module 4...20 mA for 2-, 3-wire sensors.
- Toolless mounting.
- Quick transmission time of 40 ms.
- 3 freely selectable directions of rotation for the flat cable.
Introduction
The new 2-channel ClassicLine modules for field applications are now easier to use with their novel assembly technology. This technology guarantees fast, toolless and at the same time very secure mounting.
Special features- quick mounting of upper and lower parts
- very safe mounting
- easy addressing
- flat cable can be inserted from 3 different directions
- high protection rating
- powerful LEDs for status and diagnosis
Advantages and customer benefits
The flat cable can be inserted from three different directions. The upper and lower parts are no longer mounted by four screws but by a slide. Quick and very secure mounting are guaranteed. All controls and indicators are located on the front display. Thanks to their high luminosity the LEDs are particularly easy to see. Signal states, operating voltage and faults are indicated.
No software required
For masters according to the specification 2.1 + 3.0 the analogue slave is detected by means of the profile and master and slave start to exchange data automatically. There is no need to program special function blocks in the user program to control and handle the analogue protocol.
Setup
The modules can be addressed either without voltage before mounting or when mounted and wired via the implemented addressing socket. Only the AC1144 addressing unit plus the E70213 addressing cable are required.
AC5222 - Active AS-i module ClassicLine
Further information: bulletin (PDF-file 276 kB).
|
|
|
|
